ada-bar-codes (002.20240219-2) unstable; urgency=medium
 .
   * Remove Multiarch: same qualifier from the -dev package because the
     .gpr gnat project contains paths that depend on the architecture.
ada-bar-codes (002.20240219-1) unstable; urgency=medium
 .
   * Initial release closes: #1065211.

binutils-or1k-elf (1.0.11) unstable; urgency=medium
 .
   * Rebuild with binutils 2.42.
   * Standards-Version: 4.7.0 (no changes)
   * Update copyright years
   * Remove ome more hardcoding of the GNU type
   * Autoreconf zlib/ again, it is fixed
   * Add missing sources for autotools in etc/
   * Include buildflags.mk as recommended by dpkg-architecture.mk

c-evo-dh (1.12-1) unstable; urgency=medium
 .
   * New Upstream Release
   * Update d/copyright
   * Use mpg123 for sound (Closes: #1067844)
   * Standards now 4.7.0 (No changes)
   * Override 32bit shared library warnings
   * Use git tags instead of tarball in d/watch

click (0.5.2-3) unstable; urgency=medium
 .
   * debian/watch:
     + Update file for recent GitLab changes of the tags overview page.
   * debian/patches:
     + Add 0006_fix-implicit-function-declaration.patch. Make -Werror=implicit-
       function-declaration unnecessary.
     + Add 0007_add-support-for-loongarch.patch. Thanks to Ruilong Wu for
       providing the patch. Resolve FTBFS on loongarch architecture. (Closes:
       #1067815).
   * debian/rules:
     + Drop DEB_CFLAGS_MAINT_STRIP = -Werror=implicit-function-declaration.
   * debian/{rules,click.install}:
     + Set systemdsystemunitdir to /usr/lib/systemd/system (not
       /lib/systemd/system/ anymore).
   * Revert "debian/control: Make bin:pkg python3-click-package arch:all."
     The python3-click-package module contains:
     preload_path = "/usr/lib/<multiarch>/click/libclickpreload.so"
     in paths.py and should thus always be arch:any. This should fix
     autopkgtest builds on non-amd64 architectures. (Closes: #1070982).
   * debian/control:
     + Bump Standards-Version to 4.7.0. No changes needed.
     + Drop B-D python3-six. Patched out in 1015_drop-using-six.patch.
click (0.5.2-2) unstable; urgency=medium
 .
   * debian/control:
     + Drop python3-mock. (Closes: #1067244).
     + Drop from B-D: python3-pep8.
     + Bump Standards-Version: to 4.6.2. No changes needed.
click (0.5.2-1) unstable; urgency=medium
 .
   * New upstream release.
   * debian/patches:
     + Rebase 1001_fully-adjust-DEFAULT_ROOT-if-set-via-configure-option.patch.
     + Drop 0003_Drop-remaining-translation-bits.patch. Applied upstream.
     + Drop 1011_fix-home-dir-in-integration-test.patch. Accepted upstream.
     + Drop 1013_pyflakes-fixes.patch. Accepted upstream.
     + Drop 0001_Re-enable-some-tests-that-were-skipped-due-to-CI-iss.patch.
       Applied upstream.
     + Drop 0002_Require-dbus.service-for-click-user-hooks.service.patch.
       Applied upstream.
     + Drop 1016_drop-chroot-integration-tests-deprecated-upstream.patch and
       1017_drop_chroot-tests-deprecated-upstream.patch. Both accepted upstream.
     + Drop 1019a_reenable-user-tests.patch. Accepted upstream.
     + Drop 1019b_reenable-install-tests.patch. Accepted upstream.
     + Drop 0004_fix-pyversion-check.patch. Applied (differently) upstream.
     + Drop 0006_Fix-crash-on-ppc64el.patch. Applied upstream.
     + Drop 0001-preload-passwd-pw_name-is-required-by-tar.patch. Applied
       upstream.
     + Drop 1004_skip-test-ensure-ownership-quick-if-correct.patch. Not required
       anymore.
     + Add 1015_drop-using-six.patch. Stop using deprecated python3-six. (Closes:
       #1064608).
     + Add 1016_dont-ship-tests-in-python3-click-package.patch. Make build
       reproducible. (Closes: #1027988).
     + Trivially rebase patches 1005 and 1010.
     + Add 2002_skip-framework-integration-tests.patch. Ignore .placeholder file
       in /usr/share/click/frameworks/ during unit tests.
   * debian/control:
     + Add to B-D: libproperties-cpp-dev.
     + Add to B-D: dbus-test-runner.
     + In B-D, switch from gobject-introspection to gobject-introspection-bin.
       Thanks, lintian.
     + In B-D, switch from pkg-config to pkgconf. Thanks, lintian.
     + Switch from gobject-introspection to gobject-introspection-bin. Thanks,
       lintian.
     + Make bin:pkg python3-click-package arch:all.
   * debian/:
     + Add new bin:pkg click-service.
   * debian/rules:
     + Create .placeholder file in /usr/share/click/frameworks/. Thanks,
       lintian.
   * debian/copyright:
     + Add auto-generated copyright.in file.
     + Rewrite copyright attributions.
click (0.5.0-11) unstable; urgency=medium
 .
   * debian/patches:
     + Trivially rebase 0001-preload-passwd-pw_name-is-required-by-tar.patch.
   * debian/rules:
     + Whitespace fix.
     + Strip hardening flag -Werror=implicit-function-declaration. (Closes:
       #1066308).

cutils (1.6-7) unstable; urgency=medium
 .
   * QA upload.
   * debian/control:
     - Add Rules-Requires-Root field.
     - Bump Standards-Version to "4.7.0".
   * debian/copyright:
     - Add Boyuan Yang to packaging copyright.
     - Reformat copyright years.
     - Update packaging copyright information.
   * debian/upstream/metadata: Add upstream metadata information.

dlm (4.2.0-4) unstable; urgency=medium
 .
   [ Chris Hofstaedtler ]
   * [2755925] Delegate placement of udev files to pkg-config data (Closes:
     #1057751)
 .
   [ Valentin Vidic ]
   * [3d237e4] Update Build-Depends pkg-config to pkgconf
   * [f2b7a9c] Update Standards-Version to 4.7.0 (no changes required)
   * [556159d] Update patches forwarded status
   * [4339b52] Update lintian-overrides for new location of udev rules

dmaths (4.4.0.0+dfsg1-3) unstable; urgency=medium
 .
   * QA upload.
 .
   * Added d/gbp.conf to enforce use of pristine-tar
     and set debian branch.
   * Use wrap-and-sort -at for debian control files
   * Updated vcs in d/control to Salsa.
   * Updated Standards-Version from 4.1.0 to 4.7.0.
   * Update lintian override info format in
     d/libreoffice-dmaths.lintian-overrides on line 5-11.
   * Trim trailing whitespace.
   * Use secure copyright file specification URI.
   * Bump debhelper from old 10 to 13.
   * Set debhelper-compat version in Build-Depends.
   * Fix day-of-week for changelog entry 3.4+dfsg1-1.
   * Added missing trailing newline to d/rules.

docbook (4.5-11) unstable; urgency=medium
 .
   * QA upload.
 .
   [ Debian Janitor ]
   * Update standards version to 4.6.1, no changes needed.
 .
   [ Petter Reinholdtsen ]
   * Added d/gbp.conf to enforce use of pristine-tar and set debian branch.
   * Updated Standards-Version from 4.6.1 to 4.7.0.
   * Use wrap-and-sort -at for debian control files

docbook-xml (4.5-13) unstable; urgency=medium
 .
   * QA upload.
 .
   * Added d/gbp.conf to document and enforce pristine-tar and the branch used.
   * Updated Standards-Version from 4.6.0.1 to 4.7.0.
   * Use wrap-and-sort -at for debian control files

dolfinx-mpc (0.8.0.post1-2) unstable; urgency=medium
 .
   * Build-Depends on released libbasix-dev and libdolfinx-dev 0.8.0, rather
     than the pre-release git snapshot.
dolfinx-mpc (0.8.0.post1-1) unstable; urgency=medium
 .
   * New upstream release
     - compatibility with dolfinx 0.8.0
     - post0 and post1 tags are due to bugfixes in the release of the docker
       image, hence 0.8.0.post1 is functionally equivalent to 0.8.0
   * Bump ABI to 0.8 in debian/control
dolfinx-mpc (0.7.3~git20240414.2e42426-1) experimental; urgency=medium
 .
   * New upstream snapshot.
   * Add Francesco Ballarin to uploaders.
   * Build-Depends on libbasix-dev and libdolfinx-dev from experimental 0.8.0
     pre-release
   * Increase Standards-Version: 4.7.0
   * Refresh patches
   * Add python3-nanobind and python3-scikit-build-core to Build-Depends
   * copy LICENSE to python dir during python module build. Upstream's
     pyproject.toml uses a relative path ../LICENSE, but pybuild copies
     source and builds in tmp, missing the LICENSE file unless it is
     copied there. Use debian/patches/python_local_LICENSE.patch.
   * Update Maintainer: Debian Science Team
dolfinx-mpc (0.7.2-1.1~exp1) experimental; urgency=medium
 .
   * Non-maintainer upload.
   * Rename libraries for 64-bit time_t transition.
dolfinx-mpc (0.7.2-1) unstable; urgency=medium
 .
   * New upstream release.
dolfinx-mpc (0.7.1-1) unstable; urgency=medium
 .
   * New upstream release.
   * update debian/watch to current best-practice for github.
     Needed to catch "post" versions in downloaded upstream filename.
dolfinx-mpc (0.7.0.post1-1) unstable; urgency=medium
 .
   * New upstream release patch.
     - applies debian patch include_algorithm.patch
dolfinx-mpc (0.7.0-1exp1) experimental; urgency=medium
 .
   * New upstream release (ABI 0.7).
     - applies debian patch fix_mesh_py3.11.patch
   * debian patch include_algorithm.patch #includes <algorithm> to
     define std::find. See upstream Issue#80.
dolfinx-mpc (0.6.1-3) unstable; urgency=medium
 .
   * rebuild with gcc-13 (with dolfinx patched). Closes: #1037623.
dolfinx-mpc (0.6.1-2) unstable; urgency=medium
 .
   * push dolfinx-mpc 0.6 to unstable
dolfinx-mpc (0.6.1-1) experimental; urgency=medium
 .
   * New upstream release (ABI 0.6).
   * drop debian patch cmake_dolfinx_upper_version.patch
dolfinx-mpc (0.5.0.post0-2) unstable; urgency=medium
 .
   * debian patch fix_mesh_py3.11.patch repairs finalisation of mpc
     following py3.11 mesh patch to dolfinx
   * build for all supported python versions, test only on default
     python (ffcx JIT files may clash between different python
     versions. Delete ~/.cache/fenics to clear the cache if necessary)
dolfinx-mpc (0.5.0.post0-1) unstable; urgency=medium
 .
   * Initial release. (Closes: #1026079)
   * add debian patches
     - cmake_dolfinx_upper_version.patch imposes upper version on
       dolfinx and basix dependencies (enabling use of newer patch
       releases) and specifies dolfinx=0.5.2 (since upstream PR#2358 is
       not yet finished for handling dolfinx version ranges)
     - cmake_config_libdir.patch installs cmake config files to
       arch-dependent location
     - tests_no_numba.patch eliminates numba from python tests
       (numba is currently not available)
     - cmake_no_runpath.patch switches off RUNPATH in shared library
       and python extensions (.so)
   * Disable pybuild tests when building python modules. Unittest
     discover triggers a missing numba error, and is not used anyway.
   * tests are currently only run for python3.10.
     See https://github.com/FEniCS/dolfinx/issues/2423
   * use cache dir in local build dir to run tests
   * Build-Depends: pybuild-plugin-pyproject even though no
     pyproject.toml file is present. pyproject builds are now better
     and simpler than distutils (which runs the internal cmake
     configuration twice, once for the build rule, and again for the
     install rule).

evolution (3.52.1-4) unstable; urgency=medium
 .
   * Fix arch:all build
evolution (3.52.1-3) unstable; urgency=medium
 .
   * Move libevolution-rss-common.so to libevolution package (Closes: #1070833)
     (LP: #2061744)
evolution (3.52.1-2) unstable; urgency=medium
 .
   * Release to unstable
evolution (3.52.1-1) experimental; urgency=medium
 .
   * New upstream release
   * debian/control: Bump e-d-s dependencies and build-dependencies to 3.52.1
evolution (3.52.0-1) experimental; urgency=medium
 .
   * New upstream release
     - 3.51.3 Bug Fixes:
       + Skip message Note part in "Edit as New Message"
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2627)
       + Composer: Option to prefer local datetime in reply credits
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2657)
       + Composer: Preserve whitespace in text/plain drafts
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2659)
       + Unclear licensing in some places
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2661)
       + Composer: Try to parse pasted addresses with ';' better
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2663)
       + itip-view: Prefer user's choice for 24h time format
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2664)
       + Tasks: Add Status=Needs Action filter option (Nico Rikken)
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2665)
       + Pasting into composer address box can lose spaces
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2670)
       + Support webcals: URI
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2675)
       + ESourceConfig: Window width always increases on Type change
         in Wayland
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2677)
       + Remove old stock icons from table and cell Properties dialogs
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2679)
       + Mail: Add 'From' header to default Free Form Expression
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2680)
       + Composer: Drop extra font-size in elems of paste in HTML
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2685)
       + build: Make sure tests run in serial
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/522)
     - 3.51.3 Miscellaneous:
       + Replace G_TYPE_INSTANCE_GET_PRIVATE() with G_ADD_PRIVATE()
       + plugin_ui_hook_finalize: Chain up to the finalize() method
       + Composer: Stop message send when retrieve of the content
         failed
       + Composer: Hint places for folding in Autocrypt header
       + Composer: Change "Remove Key" to "Send without Key" in
         Autocrypt question
       + ci: Export the help with Gitlab Pages (Corentin Noël)
       + itip-formatter: Show "Unable to send item..." errors with
         error icon
       + Calendar: Remove support for
         E_CAL_STATIC_CAPABILITY_RETRACT_SUPPORTED
       + Calendar: Meeting deletion can sometimes send duplicate
         cancel messages
       + appdata: Add <branding/> colors
     - 3.52.0 Bug Fixes:
       + Workaround excessive memory use
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2632)
       + Calendar: Prefer html/markdown description in preview
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2672)
       + Incorrect/missing URLs in app metadata
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2691)
     - 3.52.0 Miscellaneous:
       + main.c: Fix unused variable when in non-development build
       + SetupBuildFlags.cmake: Remove "-Wl,--no-undefined" from
         compiler flags
       + ci: Create top 'pages' index.html page
       + Plugins' .xml.in: Update homepage URI from GNOME wiki to
         GNOME GitLab (Andre Klapper)
   * debian/control: Bump e-d-s dependencies and build-dependencies
     to 3.52.0
evolution (3.51.2-1) experimental; urgency=medium
 .
   * New upstream release
   * debian/control: Bump e-d-s dependencies and build-dependencies to 3.51.2
     (Closes: #1064378)

evolution-data-server (3.52.1-2) unstable; urgency=medium
 .
   * Release to unstable
 .
 evolution-data-server (3.52.1-1) experimental; urgency=medium
 .
   * New upstream release
 .
 evolution-data-server (3.52.0-1) experimental; urgency=medium
 .
   * New upstream release
     - 3.51.3 Bug Fixes:
       + CalDAV Scheduling - utilize SCHEDULE-AGENT propertyparameter
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/139)
       + build: Make sure tests run in serial
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/522)
       + IMAPx: Disable PREVIEW fetch on error
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/526)
       + Camel: Long header folding should not add empty folding line
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/527)
       + Camel: Fix possible busy loop in camel-lock-helper
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/528)
       + Support webcals: URI
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2675)
     - 3.52.0 Bug Fixes:
       + addressbook: Crash on authenticate and finalize in two threads
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/523)
       + Calendar: Prefer html/markdown description in preview
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2672)
     - 3.52.0 Miscellaneous:
       + SetupBuildFlags.cmake: Remove "-Wl,--no-undefined" from compiler flags
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/commit/e02f0cbc)
       + Replace https://wiki.gnome.org/Apps/Evolution in the sources
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/commit/5159620e)
       + Replace live.gnome.org with wiki.gnome.org URI (Andre Klapper)
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/commit/32d6ffed)
   * debian/libecal-2.0-3.symbols: Update to add new symbol
 .
 evolution-data-server (3.51.2-1) experimental; urgency=medium
 .
   * New upstream release
   * debian/evolution-data-server.install: Install alarm-notify app icon
   * Update package name to match soname bump: libecal-2.0-2t64 → libecal-2.0-3
   * Update symbols files
evolution-data-server (3.52.1-1) experimental; urgency=medium
 .
   * New upstream release
evolution-data-server (3.52.0-1) experimental; urgency=medium
 .
   * New upstream release
     - 3.51.3 Bug Fixes:
       + CalDAV Scheduling - utilize SCHEDULE-AGENT propertyparameter
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/139)
       + build: Make sure tests run in serial
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/522)
       + IMAPx: Disable PREVIEW fetch on error
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/526)
       + Camel: Long header folding should not add empty folding line
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/527)
       + Camel: Fix possible busy loop in camel-lock-helper
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/528)
       + Support webcals: URI
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2675)
     - 3.52.0 Bug Fixes:
       + addressbook: Crash on authenticate and finalize in two threads
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/523)
       + Calendar: Prefer html/markdown description in preview
         (https://gitlab.gnome.org/GNOME/evolution/-/issues/2672)
     - 3.52.0 Miscellaneous:
       + SetupBuildFlags.cmake: Remove "-Wl,--no-undefined" from compiler flags
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/commit/e02f0cbc)
       + Replace https://wiki.gnome.org/Apps/Evolution in the sources
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/commit/5159620e)
       + Replace live.gnome.org with wiki.gnome.org URI (Andre Klapper)
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/commit/32d6ffed)
   * debian/libecal-2.0-3.symbols: Update to add new symbol
evolution-data-server (3.51.2-1) experimental; urgency=medium
 .
   * New upstream release
   * debian/evolution-data-server.install: Install alarm-notify app icon
   * Update package name to match soname bump: libecal-2.0-2t64 → libecal-2.0-3
   * Update symbols files

evolution-ews (3.52.1-2) unstable; urgency=medium
 .
   * Release to unstable
 .
 evolution-ews (3.52.1-1) experimental; urgency=medium
 .
   * New upstream release
     - Improve reproducibility (Closes: #1004057)
   * Bump evolution and evolution-data-server build-dependencies to >= 3.52.1
 .
 evolution-ews (3.52.0-1) experimental; urgency=medium
 .
   * New upstream release (LP: #2056649)
     - 3.51.3 Bug Fixes:
       + Retract dialog can duplicate cancellation mails
         (https://gitlab.gnome.org/GNOME/evolution-ews/-/issues/259)
       + Do not change organizer when adding meeting from mail
         (https://gitlab.gnome.org/GNOME/evolution-ews/-/issues/260)
       + Impersonate mailbox uses original user's connection
         (https://gitlab.gnome.org/GNOME/evolution-ews/-/issues/261)
       + build: Make sure tests run in serial
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/522)
     - 3.52.0 Bug Fixes:
       + Use OAuth2 protocol 2.0 by default
         (https://gitlab.gnome.org/GNOME/evolution-ews/-/issues/264)
     - 3.52.0 Miscellaneous:
       + build: Correct overlinking on the m365 part
       + SetupBuildFlags.cmake: Remove "-Wl,--no-undefined" from
         compiler flags
       + Replace https://wiki.gnome.org/Apps/Evolution in the sources
   * debian/control: Bump evolution and evolution-data-server
     build-dependencies to >= 3.52.0
evolution-ews (3.52.1-1) experimental; urgency=medium
 .
   * New upstream release
     - Improve reproducibility (Closes: #1004057)
   * Bump evolution and evolution-data-server build-dependencies to >= 3.52.1
evolution-ews (3.52.0-1) experimental; urgency=medium
 .
   * New upstream release (LP: #2056649)
     - 3.51.3 Bug Fixes:
       + Retract dialog can duplicate cancellation mails
         (https://gitlab.gnome.org/GNOME/evolution-ews/-/issues/259)
       + Do not change organizer when adding meeting from mail
         (https://gitlab.gnome.org/GNOME/evolution-ews/-/issues/260)
       + Impersonate mailbox uses original user's connection
         (https://gitlab.gnome.org/GNOME/evolution-ews/-/issues/261)
       + build: Make sure tests run in serial
         (https://gitlab.gnome.org/GNOME/evolution-data-server/-/issues/522)
     - 3.52.0 Bug Fixes:
       + Use OAuth2 protocol 2.0 by default
         (https://gitlab.gnome.org/GNOME/evolution-ews/-/issues/264)
     - 3.52.0 Miscellaneous:
       + build: Correct overlinking on the m365 part
       + SetupBuildFlags.cmake: Remove "-Wl,--no-undefined" from
         compiler flags
       + Replace https://wiki.gnome.org/Apps/Evolution in the sources
   * debian/control: Bump evolution and evolution-data-server
     build-dependencies to >= 3.52.0
evolution-ews (3.51.2-1) experimental; urgency=medium
 .
   * New upstream release
   * Bump evolution and evolution-data-server build-dependencies to >= 3.51.2

fcitx5-bamboo (1.0.5-1) unstable; urgency=medium
 .
   * New upstream release.

fcitx5-keyman (1.1.1-1) unstable; urgency=medium
 .
   * New upstream release.

fcitx5-lua (5.0.13-1) unstable; urgency=medium
 .
   * New upstream release.

fenics-dolfinx (1:0.8.0-6) unstable; urgency=medium
 .
   * debian patch Newton_KSP_ref_counter_PR3190.patch applies upstream
     PR3190 to fix reference counting causing a GC segfault in
     NonlinearProblems (NewtonSolver).
   * skip test-dolfinx-python-pusimp on riscv64
fenics-dolfinx (1:0.8.0-5) unstable; urgency=medium
 .
   * debian/tests: reinstate Restrictions: allow-stderr for cpp tests.
     Needed since armhf sends C++ warnings to stderr.
fenics-dolfinx (1:0.8.0-4) unstable; urgency=medium
 .
   * add armhf to GJK (test_cube_distance in test_gjk) skip list.
     Skip only failing arches in debian/tests.
   * align debian/tests with tests skipped in debian/rules. All tests
     should now pass except test_cube_distance and test_nonlinear_pde
     on some arches (and skip slow tests on riscv64).
   * debian/tests: remove Restrictions: allow-stderr from all tests
     (was added for legacy dolfin, should be deprecated for dolfinx)
   * skip a large number of python unit tests on riscv64, which is slow
     and times out on debci
fenics-dolfinx (1:0.8.0-3) unstable; urgency=medium
 .
   * python3-dolfinx-real and python3-dolfinx-complex: add missing Depend on
     python3-pusimp
fenics-dolfinx (1:0.8.0-2) unstable; urgency=medium
 .
   [ Francesco Ballarin ]
   * Add back pusimp tests, but only when internet is available
     - update pusimp.patch to test for internet availability
     - motivate internet availability in README.Debian
     - test all available python versions in autopkgtest file
       debian/tests/test-dolfinx-python-pusimp
     - testing now requires python3-requests
   * Drop http_proxy="" https_proxy="" from debian/rules, in order not
     to require internet availability while building.
   * Require restrictions: needs-internet while testing pusimp with autokpgtest
 .
   [ Drew Parsons ]
   * move python3-jupytext, python3-matplotlib to Build-Depends-Indep
     (needed only for jupytext to build docs)
   * update debian/tests
     - add skipped numba demos (demo_static-condensation.py) to demo skip list
     - test-dolfinx-python-pusimp Depends: python3-all (for py3versions -s)
fenics-dolfinx (1:0.8.0-1) unstable; urgency=medium
 .
   [ Francesco Ballarin ]
   * New upstream release v0.8.0
   * Build-Depends and Depends on release FEniCSx 0.8.0 components
   * Add Build-Depends on python3-jupytext, and remove former workaround
     - also requires python3-matplotlib as Build-Depends, since demos import it
   * Remove docs_no_jupytext.patch
   * Refresh patches
   * Remove consistent_dtype_PR3139.patch, which has been merged upstream
 .
   [ Drew Parsons ]
   * skip test_nonlinear_pde on mips64el during build
   * refactor debian/tests to use bash arrays to manage python tests and
     demos to be skipped (using scipy's method)
   * debian/tests times out on riscv64, so skip the slowest python
     tests and demos and run tests with -v to monitor.
     Also skip slow build tests.
   * disable pusimp for unstable
   * set XDG_CACHE_HOME to local doc build dir when building docs in
     order to avoid /nonexistent path errors from the ffcx jit cache
     when building in a chroot without a user home (e.g. pbuilder/pdebuild)
     cf. dolfinx/jit.py l.24
   * debian patch lib_rename.patch: reintroduce cmake test for complex
     scalars (removed in 0.8) in HAVE_SCALAR_COMPLEX (removing "_PETSC")
fenics-dolfinx (1:0.8.0~git20240411.cd10d4e-5) experimental; urgency=medium
 .
   * Require python3-pusimp and add pusimp.patch
   * Add test file for usage of python3-pusimp
   * Do not test pusimp while building, because the test assumes
     python3-dolfinx to be already installed.
fenics-dolfinx (1:0.8.0~git20240411.cd10d4e-4) experimental; urgency=medium
 .
   * report python unit test durations at build time
     (to check why riscv64 is so slow)
   * skip python unit tests failing to converge at build time
     - armel mips64el sparc64: test_cube_distance (in test_gjk)
     - ppc64: test_nonlinear_pde
fenics-dolfinx (1:0.8.0~git20240411.cd10d4e-3) experimental; urgency=medium
 .
   * debian patch consistent_dtype_PR3139.patch applies upstream PR#3139
     to provide consistent dtypes (on 32 bit arches)
fenics-dolfinx (1:0.8.0~git20240411.cd10d4e-2) experimental; urgency=medium
 .
   * enable adios2 python tests
     - debian patch test_adios2_MPI.patch skips test_vtx_reuse_mesh
       (python unit test for adios2) if MPI support is not detected
     - but run python unit tests with env ADIOS2_ALWAYS_USE_MPI=1
   * Build-Depends: python3-scipy <!nocheck> (used in unit tests)
   * Standards-Version: 4.7.0
fenics-dolfinx (1:0.8.0~git20240411.cd10d4e-1) experimental; urgency=medium
 .
   [ Francesco Ballarin ]
   * New upstream snapshot of v0.8.0 release
   * Change ABI version to 0.8
   * Add Francesco Ballarin to uploaders
   * Build-Deps: get python3-basix, python3-ffcx and python3-ufl from
     experimental (v0.8.0 snapshots)
   * Buid-Deps: drop python3-pybind11 in favor of python3-nanobind
   * Remove outdated content from README.source
   * Refresh debian patches
   * Build python package with pybuild instead of setuptools
   * Add python_local_license.patch to ensure that pybuild uses a local copy of
     the COPYING.LESSER license file
   * Build python documentation by calling sphinx instead of using a makefile
   * Drop python3-cppimport from test dependencies
 .
   [ Drew Parsons ]
   * Depends: pkgconf not pkg-config
   * debian/rules: rename override_dh_auto_install-real rule as
     debian/tmp-real so that existence of the dir can be used to
     prevent the rule being invoked twice (by
     override_dh_auto_install-arch and by override_dh_auto_install-indep)
   * enable pybuild tests using pytest
     - skip adios2 tests at build time
fenics-dolfinx (1:0.7.3-5.1~exp1) experimental; urgency=medium
 .
   * Non-maintainer upload.
   * Rename libraries for 64-bit time_t transition.
fenics-dolfinx (1:0.7.3-5) unstable; urgency=medium
 .
   * debian patch big_endian_skip_adios2_tests.patch skips using
     VTXWriter (Adios2) on big-endian systems (s390x, etc) for
     demo_interpolation-io (C++, Python), and demo_poisson,
     demo/interpolation_different_meshes (C++).  Adios2 is not fully
     tested on big-endian. Note that failure is not universal on s390x.
     demo_poisson passes in Python, and adios2 unit tests pass.
   * debian/tests: run python tests over all supported python versions
fenics-dolfinx (1:0.7.3-4.1~exp2) experimental; urgency=medium
 .
   * Fix missing exec bit on *.install caused by diff+patch round-trip
fenics-dolfinx (1:0.7.3-4.1~exp1) experimental; urgency=medium
 .
   * Non-maintainer upload.
   * Rename libraries for 64-bit time_t transition.
fenics-dolfinx (1:0.7.3-4) unstable; urgency=medium
 .
   * rebuild to test dolfinx built against adios2 configured with
     -DADIOS2_USE_Endian_Reverse=ON on big-endian systems (s390x)
fenics-dolfinx (1:0.7.3-3.1~exp1) experimental; urgency=medium
 .
   * Non-maintainer upload.
   * Rename libraries for 64-bit time_t transition.
fenics-dolfinx (1:0.7.3-3) unstable; urgency=medium
 .
   * add debian patch test_timing_precision.patch to allow for more
     uncertainty in timing resolution. Degradation of resolution might
     have been introduced by boost 1.83. See upstream Issue #2946.
   * dolfinx 0.7 supports PETSc 3.19. Closes: #1042003.
fenics-dolfinx (1:0.7.3-2) unstable; urgency=medium
 .
   * revert the change to adios_config_mpi.patch that added system
     include dirs from adios2::cxx11_mpi. adios2 packages have been
     reconfigured to include the required path with adios2::core.
   * update debian patch lib_rename.patch to check for petsc_real.so or
     petsc_complex.so in load_petsc_lib() [fem/petsc.py] depending on
     petsc4py.PETSc.ScalarType, or on petsc_dir if petsc4py.PETSc is not
     yet loaded.
fenics-dolfinx (1:0.7.3-1) unstable; urgency=medium
 .
   [ Drew Parsons ]
   * update debian patch adios_config_mpi.patch to use include dirs
     for adios2::cxx11_mpi in order to access ADIOSConfig.h, which is
     build-specific (mpi or serial, we want mpi)
 .
   [ Francesco Ballarin ]
   * New upstream release 0.7.3
fenics-dolfinx (1:0.7.2-2) unstable; urgency=medium
 .
   * enable ADIOS2 (VTXWriter) support
     - Build-Depends: libadios2-mpi-c++11-dev (64-bit systems only).
     - libdolfinx-dev Depends: libadios2-mpi-c++11-dev to (64-bit)
     - debian patch adios_config_mpi.patch adds mpi suffix to search
       path to find adios2 cmake config files with MPI support
       Search for COMPONENTS CXX only, to avoid depending on
       libadios2-mpi-c-dev
   * use dh_auto_configure with -D to set sourcedir to cpp source
   * debian/tests: skip demo_lagrange_variants python demo, which
     triggers a segfault when plotting elements. Possibly a bug in
     libtcl used by matplotlib.
fenics-dolfinx (1:0.7.2-1) unstable; urgency=medium
 .
   * New upstream release
fenics-dolfinx (1:0.7.1-1) unstable; urgency=medium
 .
   * New upstream release
     - applies debian patch include_std_bind.patch
   * dolfinx 0.7 uses catch2 v3. Closes: #1054701.
fenics-dolfinx (1:0.7.0-1exp2) experimental; urgency=medium
 .
   * reinstate build-time tests since catch2 v3 is now packaged.
     Drop internet access for debian/tests.
   * reinstate demo_poisson_mpi C++ tests and python unit tests
     test_cffi_assembly test_compute_closest_entity_2d. Segfault on
     32 bit systems seems to have cleared now. Closes: #995599.
fenics-dolfinx (1:0.7.0-1exp1) experimental; urgency=medium
 .
   * New upstream release. New ABI 0.7.
     - applies debian patches gcc13_PR2646.patch, gcc13_PR2647.patch,
       fix_mesh_py3.11_PR2500.patch
   * drop redundant debian patches gcc13_soname.patch,
     demo_no_pyvista_addons.patch, skip_demo_stokes_direct.patch
   * C++ tests require catch2 v3 which is not yet packaged, see
     Bug#1053516
     - skip C++ tests at build-time until catch2 v3 becomes available
     - enable internet in debian/tests to download and build catch2 v3
       for runtime tests
     - debian patch include_std_bind.patch #include <functional> to
       define std::bind for C++ tests
   * generate demo doc source files (*.md) manually using
     python/doc/source/jupytext_process.py (uses jupytext, not yet
     packaged for debian. Bug#1012388). Store generated doc files in
     debian/doc/demos. Document in debian/README.source. Document
     generated binary PNG image files in debian/source/include-binaries.
   * C++ demo files are now common between real and complex builds
     (complex-specific demos stop early if run in real mode)
   * drop deprecated Depends: python3-six. Closes: #1053309.
fenics-dolfinx (1:0.6.0-8) unstable; urgency=medium
 .
   * update debian patch fix_mesh_py3.11_PR2500.patch to the final
     version of PR2500 that was applied upstream (it defines
     mesh._cpp_object rather than mesh._mesh)
     - deprecates debian patches test_no_numba.patch and
       enable-importing-cffi_support-from-new-or-old-numba.patch
fenics-dolfinx (1:0.6.0-7) unstable; urgency=medium
 .
   * source-only upload for migrating to testing. Closes: #1043061.
fenics-dolfinx (1:0.6.0-6) unstable; urgency=medium
 .
   * debian patch gcc13_soname.patch adds gcc13 tweak to soname
     since gcc13 patches alter the ABI.
   * debian/tests: skip python demo demo_pml,
     has the same problems as demo_axis
fenics-dolfinx (1:0.6.0-5) unstable; urgency=medium
 .
   * debian patches gcc13_PR2646.patch and gcc13_PR2647.patch
     apply upstream PR2646 and PR2647 to fix build with gcc-13.
     Closes: #1037649.
fenics-dolfinx (1:0.6.0-4) unstable; urgency=medium
 .
   * complex-number demo demo_axis.py is generally flakey
     (fails also on i386) so skip on all arches
fenics-dolfinx (1:0.6.0-3) unstable; urgency=medium
 .
   * debian/tests: pyvista is not yet available in debian but if it is
     installed locally then run demo tests in off-screen mode
   * debian patch demo_no_pyvista_addons.patch checks availability of
     the pyvista jupyter backend used by demos. Check for trame rather
     than pythreejs or ipygany, as recommended by pyvista. Note that
     none of these backends are currently packaged for debian (hence
     the need for the check).
   * debian/tests: skip complex-number demo demo_axis.py on failing
     architectures armel, armhf, s390x.
     cf. https://github.com/FEniCS/dolfinx/issues/2686
fenics-dolfinx (1:0.6.0-2) unstable; urgency=medium
 .
   * Standards-Version: 4.6.2
fenics-dolfinx (1:0.6.0-1exp1) experimental; urgency=medium
 .
   * New upstream release.
     - bump ABI to 0.6
     - drops Depends: libxtensor-dev (and therefore libxsimd-dev, and
       drop debian patch mipsel_python_lighter.patch)
     - versioned Depends: python3-numpy (>= 1:1.21~)
   * debian patch demo_no_vtk_adios2.patch skips use of VTXWriter in
     python demos (adios2 is not yet available for Debian)
   * mark debian/tests test-dolfinx-python-unittests as #!/bin/bash
     to use [[ ]] conditionals.
fenics-dolfinx (1:0.5.2-2) unstable; urgency=medium
 .
   * add debian patches:
     - debian_version_id.patch sets git_commit_hash to
       DEBIAN_VERSION_ID (os ID from /etc/os-release with debian
       version) rather than leaving as "unknown" (since built from
       tarball source not git source).
     - fix_mesh_py3.11_PR2500.patch applies upstream PR2500 to fix
       creation of python Mesh objects from C++ in python 3.11, which
       introduced stronger type checking
   * dh_auto_clean override: clean detritus from doc builds
fenics-dolfinx (1:0.5.2-1) unstable; urgency=medium
 .
   * New upstream release.
     - applies debian patch header_algorithm_PR2323.patch
   * set test-dolfinx-python-demos to bash to use [[...]] conditional
fenics-dolfinx (1:0.5.1-1) unstable; urgency=medium
 .
   * New upstream release
     - applies debian patch cmake_dolfinx_xsimd.patch
   * update debian patch test_no_numba.patch to skip entire test file
     if numba is not available. Affects python fem unit tests:
     test_custom_jit_kernels.py, test_element_integrals.py,
     test_expression.py, test_interpolation.py
fenics-dolfinx (1:0.5.0-1exp3) experimental; urgency=medium
 .
   * fix spelling error in mip[s]64el
fenics-dolfinx (1:0.5.0-1exp2) experimental; urgency=medium
 .
   * apply build flag -Wno-error=maybe-uninitialized on mip64el to
     prevent xtensor (xtl/xsequence.hpp) causing build failure.
     Closes: #1017053
fenics-dolfinx (1:0.5.0-1exp1) experimental; urgency=medium
 .
   * New upstream release.
     - bump ABI to 0.5
     - applies debian patch cmake_dolfinx_mpi_cxx.patch
     - libdolfinx-dev [Build-]Depends: libpugixml-dev
   * update debian patch cmake_dolfinx_xsimd.patch to ensure XSIMD
     configuration is propagated if configured at build time.
     Required so that applications (demos) and python extensions are
     built with the corresponding XSIMD support used to build
     libdolfinx*.so, otherwise there is a discrepancy in symbol
     definitions, see https://github.com/FEniCS/dolfinx/issues/2326
   * debian patch header_algorithm_PR2323.patch applies upstream PR2323
     to #include <algorithm> in MPI.h enabling std::sort to be used
     with gcc 12.
   * remove python/build-{real,complex}, debian/tmp-{real,complex} and
     python/fenics_dolfinx.egg-info build dirs with dh_auto_clean
fenics-dolfinx (1:0.4.1-7) unstable; urgency=medium
 .
   * fix skipping of test_fem_pipeline on s390x
fenics-dolfinx (1:0.4.1-6) unstable; urgency=medium
 .
   * update debian/tests
     - skip MPI test of test_fem_pipeline on s390x
     - reenable helmholtz demo on i386, armhf (no longer slow)
fenics-dolfinx (1:0.4.1-5) unstable; urgency=medium
 .
   * apply build flag -Wno-error=maybe-uninitialized on mips64el to
     prevent xtensor (xtl/xsequence.hpp) causing build failure.
     Closes: #1017053
fenics-dolfinx (1:0.4.1-4) unstable; urgency=medium
 .
   * libdolfinx-dev Depends: libxtensor-dev, libxsimd-dev with the
     versions that dolfinx was built against.
fenics-dolfinx (1:0.4.1-3) unstable; urgency=medium
 .
   * debian/tests: unittests Depends: python3-cppimport
   * debian/tests: explicitly switch off the pytest-mpi plugin when
     running MPI python demo tests. The mpi plugin is incompatible with
     the custom mpi marker used by python/demo/test.py,
     see https://github.com/FEniCS/dolfinx/issues/2254
fenics-dolfinx (1:0.4.1-2) unstable; urgency=medium
 .
   * debian patch skip_demo_stokes_direct.patch skips test assertions
     for direct solvers in python Stokes demo since they return
     nan or inf. See https://github.com/FEniCS/dolfinx/issues/2242
   * versioned Build-Depends: python3-pybind11 (>= 2.7.0~)
     (fails at runtime with pybind11 2.6, see upstream Issue#2248)
   * add arm64 to list of xsimd-supported architectures. Expected to
     work fine with xsimd 0.8 and xtensor 0.24.
     i386 and armhf still fail xsimd tests so don't add them yet.
   * drop Build-Depends: libxtensor-blas-dev (no longer used)
   * brings FEniCS 0.4 to unstable. Closes: #1013518.
fenics-dolfinx (1:0.4.1-1exp3) experimental; urgency=medium
 .
   * update debian patch mipsel_python_lighter.patch to drop mipsel
     python optimizations to -Os -g0 to allow for high memory
     requirements of xt (xtensor) headers. Reenable LTO.
fenics-dolfinx (1:0.4.1-1exp2) experimental; urgency=medium
 .
   * debian patch mipsel_python_lighter.patch switches off LTO when
     building python module extensions on mipsel. mipsel runs out of
     memory so we need to lighten its load.
fenics-dolfinx (1:0.4.1-1exp1) experimental; urgency=medium
 .
   * New upstream release.
     - new ABI bump libdolfinx-real0.4, libdolfinx-complex0.4
     - versioned Depends:  libbasix-dev (>= 0.4.0~),
       python3-ffcx (>= 1:0.4.2~), python3-ffcx (<< 1:0.5.0),
       python3-ufl (>= 2022.1.0~), python3-ufl (<< 2022.2.0)
     - applies debian patches:
        FindPETSc_mpi_include_path.patch
        MPI_remove_inplace_PR1738.patch
        avoid_cppimport_tests.patch
        stokes-taylor-hood-NAN.patch
        test_bbox_non_unique_facets.patch
        use_std_filesystem_PR1980.patch
        use_system_catch.patch
     - update debian/copyright: FindUFC.cmake changed to FindUFCx.cmake,
       some files removed
     - changed identification of use of PETSc complex numbers.
       has_petsc_complex removed from dolfinx.common
     - update debian patch lib_rename.patch h to check for complex PETSc
       using HAVE_PETSC_SCALAR_COMPLEX as well as PETSC_SCALAR_COMPLEX.
       installed cmake file checks symbol in petscconf.h.
       Use petsc4py and numpy in python tests to check
       if complex PETSc is used
   * Build-Depends-Indep: python3-myst-parser (for python docs)
   * add debian patches
     - cmake_dolfinx_mpi_cxx.patch links dolfinx cmake
       configuration to MPI_CXX before MPI_C. Otherwise link fails
       without libmpi_cxx.so (undefined _ZN3MPI8Datatype4FreeEv)
       cf. upstream Issue #2229.
     - cmake_dolfinx_xsimd.patch adds XTENSOR_USE_XSIMD to
       dolfinx compilation definitions when configured
     - docs_no_jupytext.patch disables use of jupytext in python docs
       (jupytext is not yet packaged for Debian). This disables
       formatting of demo docs, so add link to
       https://docs.fenicsproject.org/dolfinx/main/python/demos.html
     - test_no_numba.patch, to remove numba usage from python tests
       (numba is not available at the moment)
   * build cpp tests and demos in same dir as generated source
     otherwise cmake doesn't know to generate poisson.c from poisson.py
   * demo CMakeLists.txt now pregenerated and version.h no longer
     generated in srcdir, don't remove with dh_auto_clean
   * update debian patch lib_rename.patc
   * use set -e in debian/tests to ensure errors are not missed
   * Standards-Version: 4.6.1
fenics-dolfinx (1:0.3.0-15) unstable; urgency=medium
 .
   * python3-dolfinx-real Depends: libdolfinx-real-đev,
     python3-dolfinx-complex Depends: libdolfinx-complex-dev
     Required to provide dolfinx_*.pc, used by jit.
   * numba currently out of action, skip numba tests for now
fenics-dolfinx (1:0.3.0-14) unstable; urgency=medium
 .
   * debian patch test_bbox_non_unique_facets.patch drops use of unique
     top_facets in test_sub_bbtree_box, which corrupts the numpy type
     when applied to an empty set. See upstream Issue #2070.
     Closes: #1007798.
fenics-dolfinx (1:0.3.0-13) unstable; urgency=medium
 .
   * debian patch use_std_filesystem_PR1980.patch applies upstream
     PR1980 to replace boost::filesystem references with std::filesystem
   * debian patch docs_local_mathjax.patch builds docs using local
     mathjax script
fenics-dolfinx (1:0.3.0-12) unstable; urgency=medium
 .
   * debian/tests: skip python MPI unit tests on 32-bit systems.
     Some unit tests trigger an MPI_ABORT error for reasons unknown
     (possibly related to Bug#995599). Affects i386, armhf etc.
fenics-dolfinx (1:0.3.0-11) unstable; urgency=medium
 .
   * drop debian patch compute_entity_32bit.patch. It did not fix the
     compute_entity failures on i386, armhf. Skip
     test_compute_closest_entity_2d instead.
   * Also skip test_cffi_assembly on 32-bit arches (cf. Bug#995599)
fenics-dolfinx (1:0.3.0-10) unstable; urgency=medium
 .
   * fix tests on 32-bit systems
     - check numba.core.config.IS_32BITS in debian patch
       python_unit_test_32bit.patch when using numba parallel
     - skip mpi demos (helmholtz_2d, static_condensation_elasticity,
       poisson). cf. Bug#995599.
   * add debian patch compute_entity_32bit.patch to use int32_t
     consistently with declaration of _compute_nearest_entity
     (cf. python_unit_test_32bit.patch)
fenics-dolfinx (1:0.3.0-9) unstable; urgency=medium
 .
   * switch libdolfinx-dev to Architecture: any, since xsimd
     configuration in cmake config files is arch-specific.
     - cmake files now returned to original arch-specific path
     - mark libdolfinx-dev as Multi-Arch: same
     - python3-dolfinx-real Depends: libdolfinx-dev (= ${binary:Version})
       Likewise python3-dolfinx-complex.
   * update debian/tests (autopkgtest)
     - use common test scripts for real and complex builds
     - enable python tests using numba where available
     - skip demo_poisson_mpi* C++ demos on 32-bit arches (Bug#995599)
fenics-dolfinx (1:0.3.0-8) unstable; urgency=medium
 .
   * move libdolfinx-dev Recommends to Depends: ${xsimd:Depends},
     set to libxsimd-dev if dolfinx is configured to use xsimd
     (when xsimd is needed in dolfinx cmake config file)
fenics-dolfinx (1:0.3.0-7) unstable; urgency=medium
 .
   * skip demo_poisson_mpi build-time tests on 32-bit systems.
     Segfaults on 32-bit systems, see Bug#995599.
fenics-dolfinx (1:0.3.0-6) unstable; urgency=medium
 .
   * release dolfinx 0.3 to unstable. Closes: #996987.
   * drop xsimd support on arm64 (fails tests, see xtensor)
fenics-dolfinx (1:0.3.0-5) experimental; urgency=medium
 .
   * debian patch MPI_remove_inplace_PR1738.patch adapts upstream
     PR1738 to drop use of MPI_IN_PLACE in MPI_Alltoall.
fenics-dolfinx (1:0.3.0-4) experimental; urgency=medium
 .
   * reduce xsimd support to only those arches where it is known to
     work (amd64 arm64, and kfreebsd is untested). i.e. track basix
     and xtensor for xsimd-supporting arches.
     libxsimd-dev is available on some other arches such as i386, m68k,
     but no xsimd instructions are actually available there, which
     causes problems.
   * update debian/copyright
   * add :any to Build-Depends: python3-all-dev:any
fenics-dolfinx (1:0.3.0-3) experimental; urgency=medium
 .
   * drop xsimd support from x86 [i386 hurd-i386 x32]
     tracking xtensor (and basix)
fenics-dolfinx (1:0.3.0-2) experimental; urgency=medium
 .
   * versioned Depends: libxtensor-dev (>= 0.23.10~),
     libxtensor-blas-dev (>= 0.19.1~)
   * debian patch use_system_catch.patch uses system-installed catch2.
     Build-Depends: catch2. Closes: #993510.
fenics-dolfinx (1:0.3.0-1) experimental; urgency=medium
 .
   * New upstream release
     - Depends: libbasix-dev (>= 0.3.0~), python3-ffcx (>= 1:0.3.0~)
     - lib soname bump to 0.3
   * Build-Depends: libxtensor-dev, libxtensor-blas-dev,
     python3-pip, python3-pybind11
   * use xtensor with XSIMD support on arches where available.
     Build-Depends: libxsimd-dev (>= 7.4.4~)
      [amd64 arm64 i386 hurd-i386 kfreebsd-any m68k sh4 x32]
     arch:all libdolfinx-dev Recommends: libxsimd-dev
   * Standards-Version: 4.6.0
fenics-dolfinx (1:0.1.0-1) experimental; urgency=medium
 .
   * update source package name to fenics-dolfinx
     - update Vcs salsa paths to fenics-dolfinx
     - remove upstream/signing-key.asc
       (upstream PGP signatures no longer provided)
   * first official upstream release
     - released as 0.1.0. Raise epoch to 1: to set higher than 2019.2.0
     - update library package names to libdolfinx-{real,complex}0.1
     - update individual versioned Depends:
         python3-all-dev (>= 3.7~),
         libbasix-dev (>= 0.1.0~),
         python3-ffcx (>= 1:0.1.0~), python3-ffcx (<< 1:0.2.0),
         python3-ufl (>= 2021.1.0~), python3-ufl (<< 2021.2.0)
     - use epoch with next dolfinx version (in libdolfinx-dev)
       i.e. libdolfinx-dev Depends: libdolfinx-real-dev (<< 1:0.2~)

fenicsx-performance-tests (0.8.0-1) unstable; urgency=medium
 .
   * New upstream release, compatible with dolfinx 0.8.0
   * Standards-Version: 4.7.0 (routine-update)
   * Fix Maintainer name of Debian Science team (routine-update)
   * Require libdolfinx-dev >= 1:0.8~
   * Add Francesco Ballarin to uploaders
fenicsx-performance-tests (0.7.2-1) unstable; urgency=medium
 .
   * New upstream release.
fenicsx-performance-tests (0.7.0~git20231007.4ba90a6-1) unstable; urgency=medium
 .
   * New upstream snapshot (for dolfinx 0.7)
fenicsx-performance-tests (0.6.0~git20221116.5c95102-2) unstable; urgency=medium
 .
   * drop Depends: xtensor-dev.
     dolfinx 0.6 now uses autopointers with std::vector (C++20)
   * Standards-Version: 4.6.2
fenicsx-performance-tests (0.6.0~git20221116.5c95102-1exp4) experimental; urgency=medium
 .
   * libdolfinx-dev is not a dummy dependency package.
     Depends: libdolfinx-dev (and libdolfinx-real-dev)
fenicsx-performance-tests (0.6.0~git20221116.5c95102-1exp3) experimental; urgency=medium
 .
   * update debian patch enable_complex_build.patch to C99 standard for
     complex numbers (double _Complex) as used now by ffcx (ffcx PR#396)
   * Notwithstanding the change above, Depends: libdolfinx-real-dev
     since a complex build currently fails with g++ 12 (see upstream PR#89)
fenicsx-performance-tests (0.6.0~git20221116.5c95102-1exp2) experimental; urgency=medium
 .
   * Depends: add epoch to libdolfinx-dev version
fenicsx-performance-tests (0.6.0~git20221116.5c95102-1exp1) experimental; urgency=medium
 .
   * New upstream snapshot for dolfinx 0.6
fenicsx-performance-tests (0.5.0~git20220731.821823b-1) unstable; urgency=medium
 .
   * New upstream snapshot for dolfinx 0.5
fenicsx-performance-tests (0.4.0-1) unstable; urgency=medium
 .
   * add debian/watch for uscan
   * New upstream release (FEniCS-X 0.4)
     - replaces Poisson.ufl with Poisson.py under same MIT licence as
       other files
   * restrict debian tests to 3 cpus to aid performance in chroots
   * allow stderr in binary tests (test progress is printed to stderr)
   * Standards-Version: 4.6.1
fenicsx-performance-tests (0.0~git20210901.25e932a-1) unstable; urgency=medium
 .
   * New upstream snapshot for dolfinx 0.3.0.
   * versioned Build-Depends: cmake (>= 3.16~)
   * drop explicit Build-Depends: libbasix-dev
   * build executables without RPATH to use preferred libpetsc_real.so
     configured by alternatives
   * Standards-Version: 4.6.0
fenicsx-performance-tests (0.0~git20210410.63b5b42-2) experimental; urgency=medium
 .
   * add debian patch enable_complex_build.patch to invoke
     ffcx --scalar_type "double complex" when building tests against
     the complex number build of dolfinx,
     for example with PETSC_DIR=/usr/lib/petscdir/petsc-complex
   * use Poisson test with hypre only if built against real PETSc
     (complex petsc does not yet support hypre)
fenicsx-performance-tests (0.0~git20210410.63b5b42-1) experimental; urgency=medium
 .
   * New upstream snapshot
     - tests dolfinx using basix with xtl,xtensor,xtensor-blas
     - Depends: libbasix-dev, xtensor-dev,
        libdolfinx-dev (>= 2019.2.0~git20210410.b421249~)
   * fenicsx-performance-tests-source Recommends: libboost-dev (>= 1.70~)
fenicsx-performance-tests (0.0~git20210119.80e82ac-1) unstable; urgency=medium
 .
   * New upstream snapshot.
   * Build-Depends: libdolfinx-dev (>= 2019.2.0~git20210130.c14cb0a~)
fenicsx-performance-tests (0.0~git20201119.890eff6-3) unstable; urgency=medium
 .
   * Build-Depends: libboost-dev
fenicsx-performance-tests (0.0~git20201119.890eff6-2) unstable; urgency=medium
 .
   * apply Restrictions: allow-stderr to dolfinx-performance-test-source
     in debian/tests to ignore compilation warnings sent to stderr.
fenicsx-performance-tests (0.0~git20201119.890eff6-1) unstable; urgency=medium
 .
   * New upstream snapshot.
   * Standards-Version: 4.5.1
   * drop debian patch check_arch_flag.patch.
     -march-native is no longer applied in CMakeLists.txt
   * Test errors (build or CI) now trigger failure.
fenicsx-performance-tests (0.0~git20201022.8913e0f-2) unstable; urgency=medium
 .
   * update debian patch check_arch_flag.patch to not build with
     -march=native at all if cmake variable BUILD_GENERIC_ARCH is defined
   * apply BUILD_GENERIC_ARCH to cmake configure step for binary build
     (dh_auto_configure). i.e. build binaries for distribution without
     -march=native. Closes: #974843.
   * make VERBOSE=1 with debian/tests/dolfinx-performance-test-source
fenicsx-performance-tests (0.0~git20201022.8913e0f-1) unstable; urgency=medium
 .
   * New upstream snapshot.
   * provide -p EXEPATH option to debian/tests/run-dolfinx-scaling-test
     to set path to executable binary
   * run tests at build time (ignore errors for now)
fenicsx-performance-tests (0.0~git20200719.42769f8-3) unstable; urgency=medium
 .
   * debian patch check_arch_flag.patch checks whether the -march or
     -mcpu compiler flag is supported before applying it.
   * mark fenicsx-performance-tests-source as Multi-Arch: foreign
   * Build-Depends: mpi-default-dev
   * set Debian Science Team as Maintainer.
fenicsx-performance-tests (0.0~git20200719.42769f8-2) unstable; urgency=medium
 .
   * add src/Poisson.ufl (LGPL-3+) to debian/copyright
 .
 fenicsx-performance-tests (0.0~git20200719.42769f8-1) unstable; urgency=medium
 .
   * Initial release (Closes: #970123)
   * interact with tests via debian/tests/run-dolfinx-scaling-test
   * the fenicsx-performance-tests package provides both the
     precompiled executable /usr/bin/dolfinx-scaling-test
     and the controlling run script
     /usr/share/dolfinx/performance-tests/run-dolfinx-scaling-test
     (from debian/tests/run-dolfinx-scaling-test). See README.Debian

gcc-or1k-elf (1.0.7) unstable; urgency=medium
 .
   * Standards-Version: 4.7.0 (no changes)
   * Update copyright years
   * Remove one more hardcoding of the GNU type
   * Include buildflags.mk as recommended by dpkg-buildflags
   * Autoreconf libiberty again, it is fixed

glyphspkg (0.2.0-1) unstable; urgency=medium
 .
   * New upstream release.

golang-github-adrianmo-go-nmea (1.8.0-2) unstable; urgency=medium
 .
   * Drop debian/patches/sentence_customparser_test.go.patch
     because the PanicsWithError function is now present in
     golang-github-stretchr-testify-dev.
   * Change Section from devel to golang.
   * Update packaging copyright years.

golang-github-fatih-semgroup (1.2.0-3) unstable; urgency=high
 .
   * Team upload
   * Fix Test failure FAIL: TestGroup_deadlock, Closes: #1071035

golang-github-pelletier-go-toml.v2 (2.2.1-1) unstable; urgency=medium
 .
   * New upstream version 2.2.1
   * Bump versioned dependencies as per go.mod
   * Bump Standards-Version to 4.7.0 (no change)

golang-github-stratoberry-go-gpsd (1.3.0-1) unstable; urgency=medium
 .
   * Upload to unstable.
golang-github-stratoberry-go-gpsd (1.3.0-1~exp1) experimental; urgency=medium
 .
   * Initial release. (Closes: #1070864)

golang-google-api (0.61.0-5) unstable; urgency=high
 .
   * Team Upload
   * Fix deadlock in test after updating golang.org/x/sync to 0.7.0
     Closes: #1071038

golang-testify (1.9.0-1) unstable; urgency=medium
 .
   * New upstream version 1.9.0
   * Update dependencies per go.mod
   * Bump Standards-Version to 4.7.0 (no change)

hcloud-python (1.35.0-1) unstable; urgency=medium
 .
   * [d85fdedd] New upstream version 1.35.0

isenkram (0.58) unstable; urgency=medium
 .
   * Updated modaliases mapping using info from appstream2modaliases.
   * Added comment support in local modaliases file parser.
   * Changed compare-lintian-modaliases d/rules entry to use UDD.
   * Add comments to modaliases file with BTS links.
   * Added more hardware mappings based on BTS reports.
   * Add info in README on how to add Appstream info to packages.

labwc (0.7.2-1) unstable; urgency=medium
 .
   * New upstream release

latencytop (0.5.0-3) unstable; urgency=medium
 .
   * QA upload.
   * Orphan the package. (See #1070873)

libpam-radius-auth (2.0.1-2) unstable; urgency=medium
 .
   [ Michael Biebl ]
   * [c0b257b] d/libpam-radius-auth.install: Install PAM module into /usr
     (Closes: #1061847)
 .
   [ Helmut Grohne ]
   * [fd4dad4] d/rules: FTCBFS Pass --build/--host to configure
     (Closes: #1063449)
 .
   [ Carsten Schoenert ]
   * [caa1c5b] d/control: Bump Standards-Version to 4.7.0
     No further changes needed.

lwip (2.2.0+dfsg1-7) unstable; urgency=medium
 .
   [ Joan Lledó ]
   * Refactor max_sockets patch
     * Use a dynamic array instead of a linked list
 .
   [ Samuel Thibault ]
   * control: Build-depend on libvdeplug-dev on all Linux ports.

mistune0 (0.8.4-3) unstable; urgency=medium
 .
   * Team Upload
   * Remove confusing watch file
   * Fix Vcs URL

msgraph (0.2.1-1) unstable; urgency=medium
 .
   [ Jeremy Bícha ]
   * New upstream release
   * Release to unstable
 .
   [ Nathan Pratta Teodosio ]
   * d/tests: Add build tests as autopkgtests
 .
 msgraph (0.1.0-1) experimental; urgency=medium
 .
   * Initial release (Closes: #1062324)
msgraph (0.1.0-1) experimental; urgency=medium
 .
   * Initial release (Closes: #1062324)

music123 (16.6-7) unstable; urgency=medium
 .
   * Standards-Version: 4.7.0 (no changes)
   * Drop mpg321 alternative from Recommends.  Closes: #1067878.
   * Update copyright years

ncurses (6.5-2) unstable; urgency=medium
 .
   * Upload to unstable.
ncurses (6.5-1) experimental; urgency=medium
 .
   * New upstream release.
   * Update symbols files and bump shlibs.
     - Update the minimal version for symbols added after the 6.4 release
       to 6.5.
   * Update patch 01-debian-no-ada-doc.diff for the changed location of the
     Ada documentaton.

nmon (16q+debian-1) unstable; urgency=medium
 .
   * New upstream version 16q+debian
   * debian/rules: Update filename to compile (sync with new upstream)
   * Declare compliance with Debian policy 4.7.0
   * Update copyright years for debian/* packaging files

obexpushd (0.11.2-4) unstable; urgency=medium
 .
   * QA upload.
 .
   * Added d/gbp.conf to describe branch layout.
   * Updated vcs in d/control to Salsa.
   * Updated d/gbp.conf to enforce the use of pristine-tar.
   * Updated Standards-Version from 3.9.2 to 4.7.0.
   * Used wrap-and-sort -at for debian control files
   * Replaced obsolete pkg-config build dependency with pkgconf.
   * Trimmed trailing whitespace.
   * Changed to versioned copyright format URI.
   * Updated copyright file header to use current field names.
   * Dropped fields with obsolete URLs.
   * Bumped debhelper from deprecated 7 to 10.
   * Replaced spaces in short license names with dashes.
   * Removed unnecessary get-orig-source-target.
   * Corrected d/copyright formatting.
   * Switched d/rules to simple dh and move to debhelper level 13.

octavia (14.0.0-3) unstable; urgency=medium
 .
   * Remove nwdiag use in docs, as its now well supported in Debian.
octavia (14.0.0-2) unstable; urgency=medium
 .
   * Added pt_BR.po Brazilian Portuguese translation of debconf templates,
     thanks to Paulo Henrique de Lima Santana (Closes: #1025992).
octavia (14.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Uploading to unstable.
octavia (14.0.0~rc1-1) experimental; urgency=medium
 .
   * Add close-on-exec{2,} = true in uwsgi config.
   * New upstream release.
   * Fixed (build-)depends for this release.
   * Refreshed patches.
octavia (13.0.0-2) unstable; urgency=medium
 .
   * octavia-agent: depends on cron | cron-daemon (Closes: #1053313).
   * Added missing namespaces when generating octavia.conf.
octavia (13.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Uploading to unstable.
octavia (13.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
   * Rebased / refreshed patches.
   * Blacklist test__check_amphorav2_warning().
   * Move debian/po to debian/po.in to enable better clean-up.
octavia (12.0.0-4) unstable; urgency=medium
 .
   * Cleans better (Closes: #1048175).
octavia (12.0.0-3) unstable; urgency=medium
 .
   * Uploading to unstable.
octavia (12.0.0-2) experimental; urgency=medium
 .
   * Build-depends on openstack-pkg-tools (>= 123~).
octavia (12.0.0-1) experimental; urgency=medium
 .
   * New upstream release.
octavia (12.0.0~rc2-1) experimental; urgency=medium
 .
   * New upstream pre-release.
   * Removed lsb-base depends.
octavia (12.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Removed (build-)depends versions when satisfied in Bookworm.
   * Fixed (build-)depends for this release.
octavia (11.0.0-2) unstable; urgency=medium
 .
   * Build-depends on openstack-pkg-tools (>= 123~).
octavia (11.0.0-1.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * No source change upload to rebuild with debhelper 13.10.
octavia (11.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
octavia (11.0.0~rc1-2) unstable; urgency=medium
 .
   * Uploading to unstable.
octavia (11.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
   * Removed Fix-osutils.py-to-detect-Debian.patch applied upstream.
   * Rebased use-octavia-agent-lvs-masquerade-not-lvs-masquerade.sh.patch.
octavia (10.0.0-2) unstable; urgency=medium
 .
   * Autopkgtest: only install python3-octavia, avoiding installing the agent,
     which fails in the Debian CI (due to RAMFS setup).
octavia (10.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
octavia (10.0.0~rc1-2) unstable; urgency=medium
 .
   * Uploading to unstable.
   * Add autopkgtest.
octavia (10.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
octavia (9.0.1-1) unstable; urgency=medium
 .
   * New upstream release.
octavia (9.0.0-3) unstable; urgency=medium
 .
   * octavia-doc: add libjs-bootstrap depends (Closes: #988857).
octavia (9.0.0-2) unstable; urgency=medium
 .
   * Added pt.po Portuguese debconf messages translation thanks to Américo
     Monteiro (Closes: #982570).
   * Added es.po Spanish debconf messages translation thanks to Camaleón
     (Closes: #988376).
octavia (9.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
octavia (9.0.0~rc1-2) unstable; urgency=medium
 .
   * Uploading to unstable.
   * Fix 00_default_policy.yaml.
octavia (9.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
   * Refreshed: Fix-osutils.py-to-detect-Debian.patch
   * Rebased: use-octavia-agent-lvs-masquerade-not-lvs-masquerade.sh.patch
octavia (8.0.0-2) unstable; urgency=medium
 .
   * Upload to unstable.
octavia (8.0.0-1) experimental; urgency=medium
 .
   * New upstream release.
octavia (8.0.0~rc1-1) experimental; urgency=medium
 .
   * Tune octavia-api-uwsgi.ini for performance.
   * Install udp-masquerade.sh as /usr/bin/octavia-agent-udp-masquerade, and
     patch octavia to use that.
   * New usptream release.
   * Removed (build-)depends versions when satisfied in Bullseye.
   * Fixed (build-)depends for this release.
   * Reworked use-octavia-agent-udp-masquerade-not-lvs-masquerade.sh.patch as
     use-octavia-agent-lvs-masquerade-not-lvs-masquerade.sh.patch.
octavia (7.1.0-2) unstable; urgency=medium
 .
   * Tune octavia-api-uwsgi.ini for performance.
   * Install udp-masquerade.sh as /usr/bin/octavia-agent-udp-masquerade, and
     patch octavia to use that.
octavia (7.1.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
octavia (7.0.0-7) unstable; urgency=medium
 .
   * Rebuild source-only.
octavia (7.0.0-6) unstable; urgency=medium
 .
   * Correctly install the octavia-driver-agent.service file.
octavia (7.0.0-5) unstable; urgency=medium
 .
   * Add an octavia-driver-agent package, which is needed by the OVN provider.
octavia (7.0.0-4) unstable; urgency=medium
 .
   * octavia-agent-netns-start: add || true when adding the octavia netns, to
     make the script indempotant.
octavia (7.0.0-3) unstable; urgency=medium
 .
   * mv /etc/octavia/policy.json /etc/octavia/disabled.policy.json.old instead
     of deleting it.
octavia (7.0.0-2) unstable; urgency=medium
 .
   * Add debconf translations:
     - nl.po thanks to Frans Spiesschaert (Closes: #961430).
     - fr.po thanks to bubu (Closes: #966502).
octavia (7.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Uploading to unstable.
   * Fixed debian/watch.
   * Add a debian/salsa-ci.yml.
octavia (7.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
   * Switch to using yaml policy files in /etc/octavia/policy.d.
   * Remove Fix_Octavia_unit_tests_for_python_3.8.patch.
octavia (6.0.1-1) unstable; urgency=medium
 .
   * New upstream release.
octavia (6.0.0-3) unstable; urgency=medium
 .
   * Add a /healthcheck URL.
octavia (6.0.0-2) unstable; urgency=medium
 .
   * Add missing --namespace cotyledon when generating octavia.conf.
octavia (6.0.0-1) unstable; urgency=medium
 .
   * Add initial de.po Debconf translations (Closes: #955995).
   * New upstream release.
octavia (6.0.0~rc1-2) unstable; urgency=medium
 .
   * Uploading to unstable.
octavia (6.0.0~rc1-1) experimental; urgency=medium
 .
   * Add anacron as dependency for haproxy.
   * New upstream release.
   * Fixed (build-)depends for this release.
   * Add Fix_Octavia_unit_tests_for_python_3.8.patch.
octavia (5.0.1-2) unstable; urgency=medium
 .
   * d/patches: Add make-octavia-reproducible.patch (Closes: #908222)
   * d/po:
       - Add nl.po file (Closes: #950543).
       - Add fr.po file (Closes: #951393).
octavia (5.0.1-1) unstable; urgency=medium
 .
   * octavia-api.postinst:
     - Set bind_host in api_settings when configuring
       through debconf
   * octavia-common.postinst:
     - Set credentials in service_auth when configuring
       through debconf
   * octavia-health-manager.{config,postinst}:
     - Set bind host,port and heartbeat_key when configuring
       through debconf
   * d/rules:
     - Do not use noop fake drivers in config file
     - Fix default domain in service_auth
     - Readd keystone_auth by pkgos tools
     - Fix oslo_messaging topic to octavia_prov
   * Add some lintian overrirdes
   * New upstream version
octavia (5.0.0-2) unstable; urgency=medium
 .
   [ Ondřej Nový ]
   * Bump Standards-Version to 4.4.1.
 .
   [ Thomas Goirand ]
   * Uploading to unstable.
octavia (5.0.0-1) experimental; urgency=medium
 .
   * New upstream release.
octavia (5.0.0~rc2-3) experimental; urgency=medium
 .
   * Fix unix rights of /var/lib/octavia/ping-wrapper.sh in octavia-agent.
octavia (5.0.0~rc2-2) experimental; urgency=medium
 .
   * Add in the agent, so it's not needed to configure in the image:
     - /var/lib/octavia/haproxy-default-user-group.conf
     - /etc/modules-load.d/octavia-agent.conf
     - /var/lib/octavia/ping-wrapper.sh
     - /etc/sysctl.d/octavia-agent-sysctl.conf
   * Add a bunch of runtime dependencies in octavia-agent, so that we don't
     need to add it when building the image.
octavia (5.0.0~rc2-1) experimental; urgency=medium
 .
   * New upstream release fixing CVE-2019-17134 (Closes: #941897).
octavia (5.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
   * Removed now useless patch: hardcode-doc-path.patch.
   * Removed patch applied upstream:
     - Fix_template_that_generates_vrrp_check_script.patch
   * Add remove-sphinxcontrib.rsvgconverter-from-doc.patch.
octavia (4.0.0-6) unstable; urgency=high
 .
   * CVE-2019-17134: applied upstream patch (Closes: #941897):
     - Add CVE-2019-17134_Fix_urgent_amphora_two-way_auth_security_bug.patch
octavia (4.0.0-5) unstable; urgency=medium
 .
   * Add Fix_template_that_generates_vrrp_check_script.patch.
   * Add debian/python3-octavia.lintian-overrides.
octavia (4.0.0-4) unstable; urgency=medium
 .
   * Team upload.
   * Use debhelper-compat instead of debian/compat.
   * Bump Standards-Version to 4.4.0.
   * Fix python3-yaml depends and builds depends (Closes: #934323).
octavia (4.0.0-3) unstable; urgency=medium
 .
   * Fix octavia-agent binary in init/service file.
   * Add Fix-osutils.py-to-detect-Debian.patch.
   * Fixes Amphora's cert ramfs.
   * Add dh_python3 --shebang=/usr/bin/python3 call.
   * Uploading to unstable.
octavia (4.0.0-2) experimental; urgency=medium
 .
   [ Thomas Goirand ]
   * Fix octavia-agent binary in init/service file.
   * Add Fix-osutils.py-to-detect-Debian.patch.
   * Fixes Amphora's cert ramfs.
 .
   [ Michal Arbet ]
   * Bump openstack-pkg-tools to version 99
octavia (4.0.0-1) experimental; urgency=medium
 .
   * New upstream release.
octavia (4.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
   * Removed fix-py36-compatibility.patch applied upstream.
   * Removed python3- prefix when generating config.
   * Doc patch: hardcode-doc-path.patch.
octavia (3.0.0-3) unstable; urgency=medium
 .
   * Add an octavia-agent package.
octavia (3.0.0-2) unstable; urgency=medium
 .
   * Add install-missing-files.patch.
octavia (3.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Remove /etc/octavia/octavia.conf on purge (Closes: #905499).
   * Uploading to unstable.
octavia (3.0.0~rc3-1) experimental; urgency=medium
 .
   [ Thomas Goirand ]
   * New upstream release.
   * Fixed (build-)depends for this release.
   * Removed applied upstream patches:
     - fix-add-local-net-to-routing-table-1.patch
     - fix-lb-status-updates.patch
 .
   [ Michal Arbet ]
   * Add fix-py36-compatibility.patch
octavia (2.0.1-1) unstable; urgency=medium
 .
   * Initial release (Closes: #901440).

octavia-dashboard (13.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Uploading to unstable.
octavia-dashboard (13.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
octavia-dashboard (12.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Uploading to unstable.
octavia-dashboard (12.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
octavia-dashboard (11.0.0-4) unstable; urgency=medium
 .
   * Removed dependency on nose.
octavia-dashboard (11.0.0-3) unstable; urgency=medium
 .
   * Cleans better (Closes: #1048476).
octavia-dashboard (11.0.0-2) unstable; urgency=medium
 .
   * Uploading to unstable.
octavia-dashboard (11.0.0-1) experimental; urgency=medium
 .
   * New upstream release.
octavia-dashboard (11.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
octavia-dashboard (10.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
octavia-dashboard (10.0.0~rc1-2) unstable; urgency=medium
 .
   * Uploading to unstable.
octavia-dashboard (10.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Removed python3-oslo.log from (build-)depends.
octavia-dashboard (9.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
octavia-dashboard (9.0.0~rc1-2) unstable; urgency=medium
 .
   * Uploading to unstable.
octavia-dashboard (9.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
octavia-dashboard (8.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
octavia-dashboard (8.0.0~rc1-1) unstable; urgency=medium
 .
   * New upstream release.
   * (Build-)depends on minimum horizon >= 20.0.0+git2020.09.21.27036cc0eb.
   * Refreshed use-policy-json-format.patch.
octavia-dashboard (7.0.0-4) unstable; urgency=medium
 .
   * Upload to unstable.
octavia-dashboard (7.0.0-3) experimental; urgency=medium
 .
   * Add rm_conffile to remove old files in /etc/openstack-dashboard/enable.
octavia-dashboard (7.0.0-2) experimental; urgency=medium
 .
   * Package the enable folder in
     /usr/lib/python3/dist-packages/openstack_dashboard/local/enabled.
   * Add Breaks: python3-django-horizon (<< 3:19.2.0-2~).
octavia-dashboard (7.0.0-1) experimental; urgency=medium
 .
   * New upstream release.
octavia-dashboard (7.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Removed (build-)depends versions when satisfied in Bullseye.
   * Fixed (build-)depends for this release.
octavia-dashboard (6.0.0-2) unstable; urgency=medium
 .
   * Package the enable folder in
     /usr/lib/python3/dist-packages/openstack_dashboard/local/enabled.
octavia-dashboard (6.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Uploading to unstable.
   * Fixed debian/watch.
   * Add a debian/salsa-ci.yml.
octavia-dashboard (6.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
octavia-dashboard (5.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
octavia-dashboard (5.0.0~rc2-1) unstable; urgency=medium
 .
   * Move the package to the horizon-plugins subgroup on Salsa.
   * New upstream release.
   * Uploading to unstable.
octavia-dashboard (5.0.0~rc1-1) experimental; urgency=medium
 .
   [ Ondřej Nový ]
   * Bump Standards-Version to 4.4.1.
 .
   [ Thomas Goirand ]
   * New upstream release.
   * Fixed (build-)depends for this release.
octavia-dashboard (4.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
octavia-dashboard (4.0.0~rc1-1) unstable; urgency=medium
 .
   * New upstream release.
octavia-dashboard (3.0.0-1) experimental; urgency=medium
 .
   * New upstream release.
octavia-dashboard (3.0.0~rc1-2) experimental; urgency=medium
 .
   * Removed python3- prefix when calling the config generators.
octavia-dashboard (3.0.0~rc1-1) experimental; urgency=medium
 .
   * New upstream release.
   * Removed package versions when satisfied in Buster.
   * Fixed openstacksdk min version.
   * Standards-Version: 4.3.0 (no change).
octavia-dashboard (2.0.0-3) unstable; urgency=medium
 .
   [ Ondřej Nový ]
   * Running wrap-and-sort -bast.
 .
   [ Michal Arbet ]
   * Redesign octavia-dashboard:
       - Enabled files now in /etc/openstack-dashboard/
       - Removed post scripts which is now achieved by a trigger
       - Update copyright
   * Add use-policy-json-format.patch
   * Running wrap-and-sort -bast.
octavia-dashboard (2.0.0-2.1) unstable; urgency=medium
 .
   [ Ondřej Nový ]
   * Running wrap-and-sort -bast
 .
   [ Michal Arbet ]
   * d/control: Fix typo (Closes: #909477).
 .
   [ Thomas Goirand ]
   * Add patch to install all files, and install static files correctly
     (Closes: #905037).
octavia-dashboard (2.0.0-1) unstable; urgency=medium
 .
   * Uploading to unstable.
octavia-dashboard (2.0.0~rc3-1) experimental; urgency=medium
 .
   * New upstream release.
   * Fixed (build-)depends for this release.
octavia-dashboard (1.0.1-1) unstable; urgency=medium
 .
   * Initial release (Closes: #901608).

poppler (24.02.0-4) unstable; urgency=medium
 .
   * Team upload
   * Fix error in declaring Replaces: libpoppler-cpp0v5 (Closes: #1071009)
poppler (24.02.0-3) unstable; urgency=medium
 .
   * Team upload
   * Restore t64 changes from 22.12.0-2.2 and bump Breaks/Replaces.
     Use standard versioned Replaces instead of unversioned. (Closes: #1070862)
poppler (24.02.0-2) unstable; urgency=medium
 .
   * Team upload
   * Release to unstable
 .
 poppler (24.02.0-1) experimental; urgency=medium
 .
   * Team upload
   * New upstream release
   * Update library name to libpoppler134 to match soname
   * debian/copyright: Update path of a moved file
 .
 poppler (23.12.0-1) experimental; urgency=medium
 .
   * Team upload
   * New upstream release
   * Update library name to libpoppler133 to match soname
   * Add new symbols to symbols files
   * Build-Depend on libcurl4-gnutls-dev
 .
 poppler (23.08.0-2) experimental; urgency=medium
 .
   * Team upload
 .
   [ Jeremy Bicha ]
   * Explicitly disable gpg support for now
 .
   [ Amin Bandali ]
   * 23.08.0 upstream release addresses CVE-2023-34872 (Closes: #1042811)
   * debian/rules: Opt into LTO (to minimize symbols diff with Ubuntu)
   * Drop most optional symbols from libpoppler-qt5-1 and libpoppler-qt6-3
 .
 poppler (23.08.0-1) experimental; urgency=medium
 .
   * Team upload
   * New upstream release (Closes: #969907)
   * Update library name to libpoppler130 to match soname
   * Address some lintian error and warnings:
     - E: libpoppler-private-dev: depends-on-obsolete-package
       Suggests: libfreetype6-dev => libfreetype-dev
     - W: poppler source: build-depends-on-obsolete-package
       Build-Depends: libfontconfig1-dev => libfontconfig-dev
     - W: poppler source: build-depends-on-obsolete-package
       Build-Depends: libfreetype6-dev => libfreetype-dev
   * Update standards version to 4.6.2, no changes needed
   * Update minimum version of several Build-Depends and Depends
     per upstream
poppler (24.02.0-1) experimental; urgency=medium
 .
   * Team upload
   * New upstream release
   * Update library name to libpoppler134 to match soname
   * debian/copyright: Update path of a moved file
poppler (23.12.0-1) experimental; urgency=medium
 .
   * Team upload
   * New upstream release
   * Update library name to libpoppler133 to match soname
   * Add new symbols to symbols files
   * Build-Depend on libcurl4-gnutls-dev
poppler (23.08.0-2) experimental; urgency=medium
 .
   * Team upload
 .
   [ Jeremy Bicha ]
   * Explicitly disable gpg support for now
 .
   [ Amin Bandali ]
   * 23.08.0 upstream release addresses CVE-2023-34872 (Closes: #1042811)
   * debian/rules: Opt into LTO (to minimize symbols diff with Ubuntu)
   * Drop most optional symbols from libpoppler-qt5-1 and libpoppler-qt6-3
poppler (23.08.0-1) experimental; urgency=medium
 .
   * Team upload
   * New upstream release (Closes: #969907)
   * Update library name to libpoppler130 to match soname
   * Address some lintian error and warnings:
     - E: libpoppler-private-dev: depends-on-obsolete-package
       Suggests: libfreetype6-dev => libfreetype-dev
     - W: poppler source: build-depends-on-obsolete-package
       Build-Depends: libfontconfig1-dev => libfontconfig-dev
     - W: poppler source: build-depends-on-obsolete-package
       Build-Depends: libfreetype6-dev => libfreetype-dev
   * Update standards version to 4.6.2, no changes needed
   * Update minimum version of several Build-Depends and Depends
     per upstream

pymecavideo (8.0~rc10-3) unstable; urgency=medium
 .
   * Bumped Standards-Version: 4.7.0
   * Removed X-Python3-Version stance
   * Fixed the watch file

python-django-timezone-field (6.1.0-2) unstable; urgency=medium
 .
   * Team Upload
   * Switch to adep: python3-pytest-lazy-fixtures (Closes: #1066767)
python-django-timezone-field (6.1.0-1) unstable; urgency=low
 .
   * New upstream version 6.1.0
python-django-timezone-field (6.0.1-1) unstable; urgency=medium
 .
   * New upstream version 6.0.1
   * Add tzdata-legacy to Build-Depends, required by tests (Closes: #1052823).
python-django-timezone-field (5.1-1) unstable; urgency=medium
 .
   * New upstream version 5.1
   * Bump Standards-Version to 4.6.2.
   * Update d/copyright with new years.
   * Install testfiles using d/pybuild.testfiles.
python-django-timezone-field (5.0-1) unstable; urgency=low
 .
   * New upstream release.
   * Add pybuild-plugin-pyproject and python3-poetry-core to Build-
     Depends, required to build.
   * Let python3-django-timezone-field depend on python3-django.
   * Run wrap-and-sort -bast to reduce diff size of future changes.
python-django-timezone-field (4.2.3-1) unstable; urgency=low
 .
   * New upstream release.
   * Use github tags instead of releases for d/watch.
   * Update year in d/copyright.
   * Depend on python3-all for autopkgtests.
python-django-timezone-field (4.2.1-1) unstable; urgency=low
 .
   [ Diego M. Rodriguez ]
   * d/tests: specify import name
 .
   [ Michael Fladischer ]
   * New upstream release.
   * Update d/watch to work with github again.
   * Bump Standards-Version to 4.6.0.1.
   * Add python-pytest, python3-pytest-django and python3-pytest-lazy-
     fixture to Build-Depends.
   * README.rst has been renamed to README.md.
   * Use pytest directly to run upstream tests during build.
   * Enable upstream testsuite for autopkgtests.
   * Remove unnecessary autopkgtest-pkg-python testsuite.
python-django-timezone-field (4.1-1) unstable; urgency=low
 .
   [ Debian Janitor ]
   * Set upstream metadata fields: Bug-Database, Bug-Submit, Repository,
     Repository-Browse.
   * Update standards version to 4.5.0, no changes needed.
 .
   [ Ondřej Nový ]
   * d/control: Update Maintainer field with new Debian Python Team
     contact address.
   * d/control: Update Vcs-* fields with new Debian Python Team Salsa
     layout.
 .
   [ Michael Fladischer ]
   * New upstream release.
   * Bump debhelper version to 13.
   * Bump Standards-Version to 4.5.1.
   * Use uscan version 4.
   * Add python3-djangorestframework to Build-Depends, required by tests.
python-django-timezone-field (4.0-1) unstable; urgency=low
 .
   * New upstream release.
   * Set Rules-Requires-Root: no.
   * Set minimum Django version to 2.2.
   * Longer extended description.
python-django-timezone-field (3.1-1) unstable; urgency=low
 .
   [ Ondřej Nový ]
   * Use debhelper-compat instead of debian/compat.
 .
   [ Michael Fladischer ]
   * New upstream release.
   * Add debian/gbp.conf.
   * Bump Standards-Version to 4.4.1.
   * Bump debhelper version to 12.
python-django-timezone-field (3.0-1) unstable; urgency=low
 .
   * Initial release (Closes: #912279).

python-libtmux (0.37.0-1) unstable; urgency=medium
 .
   [ Sébastien Delafond ]
   * New upstream version 0.37.0
   * tests: blacklist a couple of failing tests

python-marshmallow-sqlalchemy (1.0.0-2) unstable; urgency=medium
 .
   * Team upload
   * Replace unmaintained lazy-fixture by lazy-fixtures

python-memcache (1.62-1) unstable; urgency=medium
 .
   * d/watch: switch to using mode=git.
   * New upstream release:
     - Removes python3-six depends (Closes: #1070355).
   * Drop python3.8.diff applied upstream.
   * Drop python312-remove-a-spurious-backslash.patch applied upstream.
   * Fix using-port-11212-instead-of-standard-11211.patch.

python-pyspnego (0.10.2-2) unstable; urgency=medium
 .
   * Rebuilt source-only.
python-pyspnego (0.10.2-1) unstable; urgency=medium
 .
   * Initial release. (Closes: #1065652)

python-requests-kerberos (0.14.0-2) unstable; urgency=medium
 .
   * Use pytest to run tests, and remove python3-mock depends.
   * Add autopkgtest.
python-requests-kerberos (0.14.0-1) unstable; urgency=medium
 .
   * New upstream release (Closes: #1064401).
   * Add python3-pyspnego as (build-)depends.
   * Cleans better.

qabc (1.11-1) unstable; urgency=medium
 .
   * New upstream release 1.11
   * Bump standards version to 4.6.2
   * Fix licences in debian/copyright

r-cran-irlba (2.3.5.1-4) unstable; urgency=medium
 .
   * Team upload
   * Rebuild against latest Matrix (Closes: #1070238)
r-cran-irlba (2.3.5.1-3) unstable; urgency=medium
 .
   * Fix regexp to detect r-base-core version in case of binary only NMUs
     Closes: #1069414
   * Standards-Version: 4.7.0 (routine-update)

r-cran-openmx (2.21.11+dfsg-4) unstable; urgency=medium
 .
   * Team upload.
   * Rebuild against latest Matrix (closes: #1070239)
r-cran-openmx (2.21.11+dfsg-3) unstable; urgency=medium
 .
   * Fix regexp to detect r-base-core version in case of binary only NMUs
     Closes: #1069388
   * Standards-Version: 4.7.0 (routine-update)

r-cran-plotmo (3.6.3-1) unstable; urgency=medium
 .
   [ Charles Plessy ]
   * Team upload
   * Standards-Version: 4.7.0 (routine-update)
   * dh-update-R to update Build-Depends (routine-update)
 .
   [ Andreas Tille ]
   * Disable reprotest

r-cran-tmb (1.9.11-2) unstable; urgency=medium
 .
   * Team upload.
   * Rebuild against latest Matrix (Closes: #1070240)
r-cran-tmb (1.9.11-1) unstable; urgency=medium
 .
   * Fix regexp to detect r-base-core version in case of binary only NMUs
     Closes: #1069364
   * New upstream version
   * Standards-Version: 4.7.0 (routine-update)

ramond (0.5-6) unstable; urgency=medium
 .
   * QA upload.
   * Orphan the package. (See #1070874)

rednotebook (2.33+ds-1) unstable; urgency=medium
 .
   * New upstream release 2.33.
   * 'd/control': Update standards-version to 4.7.0 - No changes required.

rmatrix (1.7-0-2) unstable; urgency=medium
 .
   * debian/control: Add explicit run-time dependency on R 4.4.0 or later
rmatrix (1.7-0-1) unstable; urgency=medium
 .
   * New upstream release
 .
   * debian/control: Set (Build-)Depends: to current R version
   * debian/control: Set Standards-Version: to current version

ros-perception-pcl (1.7.5-2) unstable; urgency=medium
 .
   * Add missing dependency
   * Add versioned dependencies on libpcl-dev

ruby-libvirt (0.8.3-1) unstable; urgency=medium
 .
   * Team upload.
   * New upstream version 0.8.3
   * d/p/Don-t-run-tests-that-require-qemu-system.patch: drop;
     upstream now runs all the tests with the libvirt test by default.
   * d/tests/control: switch transitional pkg-config B-D to pkgconf
   * Bump Standards-Version to 4.7.0, no changes required
   * d/ruby-libvirt.docs: update according to the new version:
     - NEWS & README: install them as .rst now
     - README.rdoc: drop, as it was only the intro page for the API docs
   * d/ruby-tests.rake: pick all the available tests now

rust-toml-edit (0.21.0-3) unstable; urgency=medium
 .
   * Team upload.
   * Package toml_edit 0.21.0 from crates.io using debcargo 2.6.1
   * Stop patching snapbox dependency.
   * Add patch for winnow 0.6.

rust-winnow (0.6.8-1) unstable; urgency=medium
 .
   * Team upload.
   * Package winnow 0.6.8 from crates.io using debcargo 2.6.1

sonic-pi (3.2.2~repack-9) unstable; urgency=medium
 .
   [ Valentin Vidic ]
   * Revert v4 changes from master branch
   * Update pkgconf build dependency
   * Move jackd to Recommends (Closes: #1023704)
   * Fix clean rules (Closes: #1049503)
   * Update Standards-Version to 4.7.0
   * Remove Georges Khaznadar from Uploaders
   * Update lintian-overrides tag name
   * Update list of files to clean (Closes: #1048239)
 .
   [ Lucas Kanashiro ]
   * Fix FTBFS with Ruby 3.2

td (1.8.0+git20240428.77b3479+dfsg-1) unstable; urgency=low
 .
   * New upstream version 1.8.0+git20240428.77b3479+dfsg
td (1.8.0+git20240331.d7203eb+dfsg-1) unstable; urgency=low
 .
   [ Ying-Chun Liu (PaulLiu) ]
   * Initial release. (Closes: #1063347)
 .
   [ Mike Gabriel ]
   * debian/watch:
     + Obtain upstream Git snapshot via uscan.
   * debian/patches:
     + Add 1001_fix-typos.patch. Fix some typos in upstream code. Thanks,
       lintian.
   * debian/:
     + Build against system's sqlite3 (sqlcipher variant).
     + Drop non-Linux example code.
   * debian/control:
     + Use correct URL convention for Vcs-*: fields.
     + Add myself to Uploaders: field.
   * debian/rules:
     + Enable all hardening flags.
   * debian/copyright:
     + Add auto-generated copyright.in file for later copyright changes tracking.
     + Rewrite file. Use individual-file-list style.
   * debian/README.source:
     + Mention how to obtain the orig tarball from upstream Git.
   * lintian:
     + Override no-symbols-control-file for C++ library.
     + Override file-without-copyright-information for LICENSE file.

tio (3.2-1) unstable; urgency=medium
 .
   * New upstream version 3.2

tmux (3.4-5) unstable; urgency=medium
 .
   * Cherry-pick more upstream fixes:
     + 3823fa2c57: start systemd scope with SendSIGHUP=yes to prevent hang
       on system shutdown.
     + 424f13fe13: don't crash server when calling switch-client from
       pane-died hook.
   * Revert upstream commit 43e5e80343 which breaks search of wrapped lines.
   * Version build-dependency on libncurses-dev to ensure we pick up updated
     symbol versions for ncurses 6.5.
tmux (3.4-4) unstable; urgency=medium
 .
   * Add tmpfiles.d configuration file to prevent automatic removal of tmux
     user directories under /tmp (closes: #1070724).
   * Update metadata on upstream patches.
   * Bump Standards-Version to 4.7.0.

verilator (5.024-1) unstable; urgency=medium
 .
   * Team upload.
   * [6494ad2] New upstream version 5.024
   * [cd7e535] d/rules: Add target override_dh_install
   * [46fe05b] d/control: Use the Recommends only on some architectures
   * [b2657af] d/verilator.lintian-overrides: Update the overrides
   * [beddf5b] d/control: Bump Standards-Version to 4.7.0
     No further modifications needed.

virtme-ng (1.24-1) unstable; urgency=medium
 .
   * Uprev upstream package.

vym (2.9.28-1) unstable; urgency=medium
 .
   * New upstream release.
     Upstream commit 8f4e86ca61801ca8a759baa9c6ffb3441b8e8291
   * Add a README.source file to describe the tarball creation.
   * Remove desktop.patch - applied upstream.
   * Refresh cmake-installs.patch.
   * Remove debian/vym.links, mimetype icon link is created
     by cmake.
vym (2.9.27-1) unstable; urgency=medium
 .
   * New upstream release (Closes: #1036774).
   * Add myself as Uploader.
   * Replace cdbs by debhelper as the Debian build helper.
   * Drop pro-file.patch - building with cmake now.
   * Refresh do-not-phone-home.patch.
   * Ship upstream man 1 vym.
   * Drop debian/menu.
   * Update debian/copyright.
   * Add a mimetype icon for the hicolor default theme.
   * Add Rules-Requires-Root set to no.
   * Add Vcs information to debian/control.
   * Raise Standards-Version to 4.7.0.
   * Delete old desktop file shipped in debian/.
   * Add desktop.patch to pass %F in the Exec setting and add keywords.
   * Add doc-base registration for the user manual.
   * Add cmake-installs.patch to adjust documentation install folder.
     (Closes: #720054)
   * Adjust watch file to query github API and change to version 4.
   * Include release-notes-2.9.md in the package docs.

weborf (1.1-1) unstable; urgency=low
 .
   * New upstream release
   * Project moved to codeberg
   * Replace email with the debian one
   * Add Vcs-* fields to d/control

wsl (0.2.1-4) unstable; urgency=medium
 .
   * QA upload.
 .
   * Added d/gbp.conf to describe branch layout.
   * Updated vcs in d/control to Salsa as dell-wsl, as WSL was taken.
   * Updated d/gbp.conf to enforce the use of pristine-tar.
   * Updated Standards-Version from 3.9.2 to 4.7.0.
   * Use wrap-and-sort -at for debian control files
   * Added missing sensible-utils dependency for sensible-editor.
   * Mark binary package as Multi-Arch: foreign, as there are no binaries.
   * Added Appstream metainfo XML to announce supported hardware.

xdrawchem (1:1.11.0-5) unstable; urgency=medium
 .
   * fixed the watch file, with searchmode=plain
   * bumped Standards-Version: 4.7.0
   * removed the version constrint for the dependency libopenbabel-dev

xmlrpc-c (1.59.03-1) unstable; urgency=medium
 .
   * Adopt package (Closes: #773435)
   * New upstream version 1.59.03 (Closes: #524550)
   * Switch to debhelper compat 13
   * Refresh patches
   * Bump soname for C++ lib, no reverse dep in Debian
   * Merge remaining time64 changes for C lib from the NMU
   * Provide .pc files for pkg-config (Closes: #614423)
   * LTO does work now (Closes: #1015709)
   * Pull in curl development package when installing
     xmlrpc devevelopement (Closes: #928702)
 .
   [ Jörg Frings-Fürst ]
   * Work for new release
   * Imported Upstream version 1.33.15+svn20141226~2672
   * Imported Upstream version 1.33.17